Replacement Motor ONLY
The Yamaha part numbers listed below and the pictures above are for reference only. The small silver replacement motor, as seen in the pictures, is what you will receive. With the motor, you will be able to rebuild your factory assembly and bring it back to life saving yourself $40 vs buying an aftermarket unit. You can do this with simple hand tools and of course we can help if need be.
NOTE: For the 00-06 Kodiak 400 & 98-01 Grizzly 600 the servo assembly case is sealed (meaning no screws to open it). These will have to be cut open to replace the motor but it can be done.
However, the best route for those two models is to buy the non-sealed/serviceable unit found here http://www.501parts.com/product/5gh-complete-servo-assembly/ This will actually bolt right up and work in the sealed units place. This would be the best route vs. cutting the sealed assembly open and replacing it and you’ll have a serviceable unit. If you want to still cut it open and replace it, it can be done. See this video on it. https://www.youtube.com/watch?v=CbgLENDH8Gs
Replacing the Servo Motor
We stand behind our products. If this servo motor fails to work for you under normal operating conditions at any time. We will replace it for free.
This product as well as most all our parts will also work with the Yamaha Clone side by side and ATV’s to include Massimo, Hisun, Benneche, Coleman, and Big Muddy.
There are no reviews yet.